http://www.cadfamily.com/a/CAD_CAID/Marine/TRIBON-M2-tutorial----Installation-Guide_2621.html
1.1 General
This Installation Guide describes how Tribon M2 is installed on a Windows platform. It
mainly describes a local installation. A3 Silent Installation of Tribon M2 contains additional
information about silent installations.
The Guide is valid for XP as well as 2000,even if, In some cases, examples are given for NT
only. Further, some of the pictures in this document originates from the corresponding Guide
for M1, which may explain that “M1” can be seen in some dialogue boxes rather than “M2”.
In order to run any program, a license file and a dongle are needed. These must be supplied
separately from Tribon Solutions AB. To install the Tribon Solutions AB dongle, shutdown
the PC. Plug the dongle into the printer port (LPT1) and restart the PC, (this is not required if
the dongle has been plugged in during the installation.)
If Tribon M1 or an older version of Tribon M2 is already installed it must be uninstalled.
Before uninstalling, it is advisable to make sure that no user defined or modified directories
or files exist on the Tribon root directory; The installation may supersede such files.
Especially modified old sample projects should be considered.
No comments:
Post a Comment