battery has no polarity indication. Just connect to the battery without thinking about
the polarity: inside the ZH 0630 is a rectifier bridge that takes care of the polarity.
The AO 0549 also connects to a serial Port on the PC, either com 1 or com 2. The
AO 0549 comes in a length of 5 meters; if this is too short for your measurement
setup, a 15 meter cable, AO 0568, is available.
Testing you installation
The installation and the functionality of Remote Control ZH 0630 can be tested by a
Visual Basic Program provided on the PULSE LabShop version 4.0 CD-ROM. The
test software is automatically installed in the Program Group “PULSE LabShop”.
With this program you can test all functions in the ZH 0630.
Customising the Software
The source code for the test program and the Remote Control program for PULSE
LabShop are available on the PULSE LabShop version 4.0 CD-ROM. Using Visual
Basic version 5.0 you can tailor these programs to suit your measurement setup. The
test program shows how to program all the functions available in ZH 0630 and the
Remote Control program shows how to control the PULSE LabShop application
using OLE control
No comments:
Post a Comment