DEFORM-3D Labs Block Simulation

http://www.cadfamily.com/downinfo/301438.html
3.4.3. Point Tracking

In DEFORM it is possible to track points in an object through the simulation. Not only
can the position of the points be tracked but also the state variables at those locations. To
open the POINT TRACKING window, click the icon.

We want to define several points on the undeformed geometry and see where they go as
the part deforms. To view the un-deformed geometry, click the button to view the
first step of the simulation. Now click three locations on the workpiece (See Figure 3.2)
(close to those shown below) and click the button.