JTAG Probes for Signum Emulators Technical Specifications

http://www.cadfamily.com/downinfo/301706.html

ADA-ARM-SWD
The ARM-SWD probe supports both ARM and Cortex boards at voltages 1.8V to 3.3V. It must be used when Cortex Serial Wire Debug or Cortex Serial Wire Output operation mode is required.
In addition to a standrd 20-pin double-row female ARM connector, this probe has a 20-pin and 10-pin high-density Cortex connectors. Only one connector can be used at a time.The ARM connector, mounted underneath the probe, has the pinout of the ADA-JET-ARM20 probe (Figure 10). The pinouts of the 20-pin and 10-pin Cortex connectors are shown in Figure 11 and Figure 12, respectively. The two high-density cables included with the probe provide a link between the Cortex connectors and the
target board (Figure 9).