CATIA Training Core & Cavity Design

http://www.cadfamily.com/downinfo/300489.html
Enter workbench Core & Cavity DesignCreate a new ProductImport the CATPart file Select the Open_body and the SurfaceSelect Bounding box center as origin of Axis SystemApply Scaling 1.05 as Shrinkage factorImport: \MasterExercise\Step1\PanHandle.CATPart
The Pan Handle - Step 2 : Defining the Main Pulling DirectionIn this Step, you will learn to analyze a pulling direction and related draft angles, to make sure the part can be unmolded and to choose the best pulling direction for the Part.

Select the surfaces and click Pulling Direction Analysis in the Pulling Direction toolbar.Locate the compass on differents surfaces to analyze and check the proposals of the dialogue box for the direction of compass. Select the Opposite Direction check box to visualize the zones that should be unmolded in the opposite direction. Select the Fly Analysis check box to display the normal to the face and the angle value between the pulling direction and the normal.