CATIA V5 TRAINING PART DESIGN REFERENCE MANUAL

First Limit: This limit represent the length of the Pad STARTING from the
PROFILE in a given direction.
„ Second Limit : This limit represent the face of an object on which the
drafted pad will sit.
„ Draft Angle : This optional feature will add a draft angle on your pad.  Be
careful with big draft angle, because the original size of the pad's profile is
located at the First Limit if the Neutral element is the First Limit.  With a
big draft angle up to the Second Limit, you may encounter error while
trying to connect the drafted pad on a too-small object. If the Neutral
element is the Second Limit, than the original profile's size will be located
on the face of the selected object.
Neutral element = First Limit -> Profile's projection is at the First Limit
Neutral element = Second Limit -> Profile's projection is at the Second
Limit
„ Fillets : Setting of fillets radii.
http://www.cadfamily.com/a/CAD_CAID/CATIA/CATIA-V5-TRAINING-PART-DESIGN-REFERENCE-MANUAL_3150.html