3/31/2015

magmasoft -- Basic.Simulation.Setup

http://www.cadfamily.com/a/CAE_FEA_CFD/magmasoft/magmasoft----Basic-Simulation-Setup_7391.html

Describe how much heat can be transferred between two
boundary (applied on the surface)
¬ E.g the heat transfer from the casting into the mold during
solidification
¬ Depend on the heat conductivity of the material, temperature
and process
¬ 3 Types of heat transfer coefficient
ˇ Time dependent (cooling channel)
ˇ Temperature dependent (casting and core/mold  Gaps
built up while the casting solidification reduces the amount of
the heat transferred into the mold)
ˇ Constant (HTC between top- and bottom mold, mold to core
and continuous cooling channel)

No comments: