Step1. Create and name the model of part as INSTANCE_ TC_COVER.PRT.
Step2. Create the solid extrusion feature shown as Fig.2, the relevant operations are shown as follows.
1 Click “insert”>“
”.
”.
2 Select the type of extrusion feature in the appeared control panel: click
icon.
icon.
3 Define the placement property of sketch section.
(1) Click 
icon in the control panel
icon in the control panel
(2) Set sketch plane: select datum plane FRONT as sketch plane.
(3) Set view orientation of sketch: take default orientation of the yellow arrow in the model as view orientation.
(4) Specify referential sketch plane: select datum plane RIGHT as reference.
(5) Specify the orientation of referential sketch plane: select Right as the orientation of referential sketch plane.
(6) Complete the placement property of sketch section: click
enter into sketch condition.
enter into sketch condition.
4 Create feature section: accept the default reference selection, and then draw the section as Fig .3 shown. Click 
button then quit sketch.
button then quit sketch.
5 Select the type of depth and its depth: set
as the type of the depth, and then enter 15 in the textbox of depth.
as the type of the depth, and then enter 15 in the textbox of depth.
6 Preview feature: click 
icon in the control panel to browse the created feature.
icon in the control panel to browse the created feature.
7 Finish feature: click 
icon to finish the extrusion.
icon to finish the extrusion.
Get free full Tutorial!
Please send me email:
cadxneter@hotmail.com
No comments:
Post a Comment