Step1. Create and name the model of part as INSTANCE_TANK_SHELL.PRT.
Step2. Create the solid extrusion feature shown as Fig.2, the relevant operations are shown as follows.
1 Click “insert”>“
”.
”.
2 Select the type of extrusion feature in the appeared control panel: click
icon.
icon.
3 Define the placement property of sketch section.
(1) Click 
icon in the control panel
icon in the control panel
(2) Set sketch plane: select datum plane FRONT as sketch plane.
(3) Set view orientation of sketch: take default orientation of the yellow arrow in the model as view orientation.
(4) Specify referential sketch plane: select datum plane RIGHT as reference.
(5) Specify the orientation of referential sketch plane: select Right as the orientation of referential sketch plane.
(6) Complete the placement property of sketch section: click
enter into sketch condition.
enter into sketch condition.
4 Create feature section: accept the default reference selection, and then draw the section as Fig.3 shown. Click 
button then quit sketch.
5 Select the type of depth and its depth: set button then quit sketch.
as the type of the depth, and then enter 20 in the textbox of depth.
6 Preview feature: click 
icon in the control panel to browse the created feature.
icon in the control panel to browse the created feature.
7 Finish feature: click 
icon to finish the extrusion.
icon to finish the extrusion.
Get free full Tutorial!
Please send me email:
cadxneter@hotmail.com
No comments:
Post a Comment