Fig.1
Step1. Create and name the model of part as INSTANCE_ UPPER_CAP.PRT.
Step2. Create the solid extrusion feature shown as Fig.2, the relevant operations are shown as follows.
1 Click “insert”>“
”.
”.
2 Select the type of extrusion feature in the appeared control panel: click
icon.
icon.
3 Define the placement property of sketch section.
(1) Click 
>
icon in the control panel
> icon in the control panel
(2) Set sketch plane: select datum plane RIGHT as sketch plane.
(3) Specify referential sketch plane: select datum plane TOPas reference.
(4) Specify the orientation of referential sketch plane: select Left as the orientation of referential sketch plane.
(5) Complete the placement property of sketch section: click
button in the window of defining the placement property of sketch section.
button in the window of defining the placement property of sketch section.
4 Create feature section: draw the section as Fig.3 shown. Click 
button then quit .sketch
button then quit .sketch
5 Select the type of depth and its depth: in control panel, set
as the type of the depth, type 75mm in “Depth” textbox.
as the type of the depth, type 75mm in “Depth” textbox.
6 Preview feature: click 
icon in the control panel to browse the created feature.
icon in the control panel to browse the created feature.
7 Finish feature: click 
icon to finish the extrusion.
icon to finish the extrusion.
Get free full Tutorial!
Please send me email:
cadxneter@hotmail.com
No comments:
Post a Comment