http://www.cadfamily.com/downinfo/303705.html
Setting the stiffener properties
Different corner finishes are available for stiffeners added at rafters:straight,convex,and concave.
The plate height is selected from the 1. BEAM BOTTOM drop-down list.Three options are available: half,full,and value.
When value is selected, the stiffener length is set in the VALUE field.
Figure 151: Apex bolted with haunch dialog box ?C Stiffeners tab
Setting the haunch properties
The haunch properties are set on the HAUNCHES tab. The set of parameters varies based on the selected joint type.
The haunches length, the projection haunch, and the haunch height at top for the beam haunch are set on this tab.
All lessons,documents and videos are provided for learn and study only,not allowed be used for commercial purpose.
If there is any violation of your rights on our website, please inform us and we will delete it at once.
No comments:
Post a Comment