Spring in UG_NX

 

figure1(final model)

Step1:Establish a new model,name spring.prt

Step2:Create helix as shown in figure 2

(1)Click ,curve ,helix,Popping the dialog box of "helix"

(2)Input the parameters like in figure 3,Click

figure 2 figure 3

Step3:Create sketch 1 as shown in figure 4

(1)Click ,,Popping the dialog box of "create sketch"

(2)Choose XC-ZC as sketch plane,click

(3)Create sketch as figure 5

(4)Click

figure 4 figure 5

Step4:Create sweep feature as shown in figure 6

figure 6

(1)Click ,sweep ,sweep along guide,Popping the dialog box of "sweep along guide"

(2)Choose sketch 1 as section,and choose the helix as guide.

http://www.cadfamily.com/html/Article/Spring%20in%20UG_NX_710_1.htm