http://www.cadfamily.com/downinfo/300367.html
Case Study: Basic FeaturesThe case study for this lesson is the engine support used in the drill support assembly and shown below. The engine support is part of the Bloc Engine sub-assembly. The focus of this case study is the creation of a features that incorporate the design intent for the part. The engine support will consists of a pad, pockets, a hole, fillets and a chamfer which can all be accessed through the Part Design Workbench.
Student Guide: Lesson 3- Case Study: Basic FeaturesIntroduce the case study for this lesson.The engine support is part of the Bloc Engine sub-assembly.Locate where the engine support is in the sub-assembly and where the sub-assembly is in the main assembly.Consider opening the Drill Press assembly in CATIA and showing the location of engine support.
Use the following steps to create the engine support:
1. Determine a suitable base feature. 2. Create pad and pocket features.3. Create holes.4. Create fillets and chamfers.5. Hide reference planes and deactivate holes.
No comments:
Post a Comment