Steering Wheel with UG_NX

Figure1(Final model)

Step1: Establish the Model file

1.Getting Start with UG NX 7.0 > Start UG NX7.0

2.Click New on the Standard toolbar (or choose File→New).

3.Click Model (the first item in the pop-up menu list)→Verify that Unit for this part are set to Millimeters.→Double-click in the Name field (under New File Name) to set it focused.→ Type your last name.

Step2:draw the main body

1.Click Sketch ,select the "XC-YC"plane

Figure2

2.Click Finish Sketch

3.Click Extrude ,and hide the sketch

Figure 3

Figure 4

4.Click Bounded Plane

Figure 5

5.Click Project Curve

Figure 6

6.Click Format→WCS→Rotate

Figure 7

7.Click Basic Curves →

Figure 8

Figure 9

Figure10

8.Click Swept

http://www.cadfamily.com/html/Article/Steering%20Wheel%20with%20UG_NX_666_1.htm

http://www.cadfamily.com/html/Article/Steering%20Wheel%20with%20UG_NX_666_2.htm

http://www.cadfamily.com/html/Article/Steering%20Wheel%20with%20UG_NX_666_3.htm