Fan_Assembly in UG_NX

 

figure1

Step1:Establish a new assembly,named fan_assembly1.prt

Step2:Add the part of bracketl_cool and placement.

(1)Click add component,,choose the file of bracketl_cool.prt,and then click .Popping the dialog box of "add component"

(2)At the positioning of placement choose absolute origin,click

Step3:Add the part of base and placement showed in figure 2.

figure 2

(1)Click add component,,choose the file of base.prt,and then click .Popping the dialog box of "add component"

(2)At the positioning of placement choose by constraints,click

Popping the dialog box of "assembly constraints"

(3)In the field of type choose touch align,and then in the field of orientation choose touch.

(4)In the window of component preview choose face 1 showed in figure 3,and then in the picture field choose face 2 showed in figure 4 .click apply.

figure 3 figure 4

(5) In the field of orientation choose align,in the window of component preview choose face 1 showed in figure 5,and then in the picture field choose face 2 showed in figure 6.click apply.

figure 5 figure 6

(6)In the field of type choose distance,in the window of component preview choose face 1 showed in figure 7,and then in the picture field choose face 2 showed in figure 8,in the distance field input 2.5.click ok.

http://www.cadfamily.com/html/Article/Fan_Assembly%20in%20UG_NX_690_1.htm