1.Launch PRO-E
2.Click 
icon, select part 
and input name “keyboard”.
3.select the reference in the figure of slide-upper ,then do the boundary of the figure ,this process as shown in figure 1 and figure 2 and figure 3.
Figure 1
Figure 2
Figure 3
4.click the 
icon ,this icon can combine the two geometry ,this process as shown in figure 4 and figure 5 and figure 6.
Figure 4
Figure 5
Figure 6
5.Click the 
icon to merge the quilt f5 and f7 ,this process as shown in figure 7 and figure 8
http://www.cadfamily.com/html/Article/Keyboard%20in%20PROE_575_1.htm
http://www.cadfamily.com/html/Article/Keyboard%20in%20PROE_575_2.htm
http://www.cadfamily.com/html/Article/Keyboard%20in%20PROE_575_3.htm
http://www.cadfamily.com/html/Article/Keyboard%20in%20PROE_575_4.htm
http://www.cadfamily.com/html/Article/Keyboard%20in%20PROE_575_5.htm
http://www.cadfamily.com/html/Article/Keyboard%20in%20PROE_575_6.htm
No comments:
Post a Comment