Foundation Modeling in UG_NX

1. Launch UG.

2. Click icon, select Model and input name “Foundation”.

3. Click icon and then click icon to input the origin as show in Figure 1, then click icon. Then edit as shown in Figure 2 and click icon.

Figure 1 Figure 2

4. Click icon, then select the ZC as the vector, and edit as shown in Figure 3, then click icon and edit as shown in Figure 4 to define the point, then click icon twice.

Figure 3 Figure 4

5. Click icon, and edit as shown in Figure 5, and click icon.

Figure 5

6. Click icon, and edit as shown in Figure 6, and click icon.

Figure 6

7. Click icon, and edit as shown in Figure 7, and click icon.

http://www.cadfamily.com/html/Article/Foundation%20Modeling%20in%20UG_NX_558_1.htm

http://www.cadfamily.com/html/Article/Foundation%20Modeling%20in%20UG_NX_558_2.htm

http://www.cadfamily.com/html/Article/Foundation%20Modeling%20in%20UG_NX_558_3.htm