http://www.cadfamily.com/downinfo/301386.html
Geometry tab
Add sharp edges : Values defining the maximum angle
allowed under which the common frontier (edge or
vertex) is not constrained for the geometry
simplification
Min holes size: Value defining the hole size under which
geometry simplification remove them
Offset: value according to which both the geometrical
simplification and meshing will be offset
Automatic curve capture: when activated, external curves
belonging to already meshed surface could be
captured in a given tolerance. Mesh can only be
captured on updated mesh part.
Geometry Selection to filter captured meshparts is
possible
Tolerance: maximum distance for curve capture.
No comments:
Post a Comment