CATIA Training Lathe Machining

http://www.cadfamily.com/downinfo/300246.html

2.2 - Define the Machine-Tool (4)

Select a Horizontal Lathe machine-tool

Select the LATHE.pptable as Post Processor Words table in the Numerical Control tab page

Click OK 2.3 - Define the Machining Axis System

Click on Reference Machining Axis System icon (5)

Select the origin point in the Machining Axis System panel and select the center point of the stock Select the Z axis in the Machining Axis System panel and key 1, 0, 0 as spindle orientation Select the X axis in the Machining Axis System panel and key 0, 0, -1 as profile orientation