AutoPol Tutorial

http://www.cadfamily.com/downlist/s_49_1.html

AutoPol Tutorial 2009-02-04 12 364 KB
The loading for our punching operation will consist of a deflection vs. time curve describing motion of the punch during the forming operation. To do this, we must define array parameters defining the time vs. deflection as shown in the table..


　 AutoPOL7DT 2009-02-04 3 133.11 KB
M. Repeat this procedure until the stress level starts to decrease, then pick the Previous Set button in the General Postproc menu to return to the maximum condition. In the example below, the maximum occurs at the fourth time point with a st..


　 AutoPOLR 2009-02-04 5 136.54 KB
Scroll down the help file to the table that shows the data that can be plotted. For our analysis, we only have the GLSTAT data (column 2) available to us by default. The other columns reference data that we would have to specifically request..


　 Ric_sapr 2009-02-04 3 547.76 KB
A. We will start with an ANSYS database that has already been created for you. This database contains the meshed blade, bird, and hub. You could create this geometry in any CAD program of your choosing, and import it into ANSYS to be meshed. ..


　 Tutorial 2009-02-04 10 5605.5 KB
7.3. Analysis Options No modifications to default ANSYS analysis options are required for this analysis. 7.4. Save Model A. In the Ansys Utility menu, select File B. Save as Jobname.db 7.5. Solution Instructions A. In the Solution menu, se..