DEFORM Hydraulic Press Simulation

http://www.cadfamily.com/downinfo/301367.html

HYDRAULIC PRESS SIMULATION - SPIKE FORGING
(ISOTHERMAL)

This lab will repeat the isothermal spike forging simulation on a 1000 ton hydraulic
press.The deformation results will appear similar to the previous spike forging labs,
but the velocity will decrease as the press runs out of power during the end of the
stroke.An initial die speed of 2??/second will be applied to the top die. As the
forming load increases, it will require more power than the press can deliver with
subsequent deceleration of the moving die.