I-DEAS Student Guide

http://www.cadfamily.com/downlist/s_19_1.html


Adding Features with Associativity 2009-01-13 14 149.58 KB
Prerequisite tutorials: 1. Introducing the I-DEAS Interface, –and– Quick Tips to Using I-DEAS 2. Creating Parts 3. Sketching and Constraining 4. Dimensioning 5. Building Sections 6. Using Sketch Planes and Understanding Sketch Pads 7..


　 Simplifying Assembly Display 2009-01-13 7 181.74 KB
In this tutorial you’re making a copy of the assembly. Copies of parts and instances are no longer associated with the original design. You should normally use check-out or reference instead of a copy. A copy is used in this case to teach t..


　 Adding Fillet, Shell, and Draft Features 2009-01-13 2 118.53 KB
A ball corner fillet allows a larger radius at the corner. This is useful for formed sheet metal parts to minimize the stretch in the corner. It also produces a more durable part because the corner isn’t as sharp. To try this fillet option,..


　 Introducing the I-DEAS Interface 2009-01-13 3 389.29 KB
Things to notice Standard Windows conventions have been incorporated into the I-DEAS interface, making the look and feel of I–DEAS consistent with the Windows environment. Much of the interface is customizable, and different layouts can be..


　 Creating Lofted Features 2009-01-13 4 198.37 KB
Create a lofted part or feature 1 of 17 You use the Loft command to loft surfaces across sections and edges, or between two existing surfaces. When lofting surfaces, you must pick each section in order and at the same approximate location (a..


　 Creating Basic Machine Parts 2009-01-13 8 279.67 KB
Prerequisite tutorials: 1. Introducing the I-DEAS] Interface –or– Quick Tips to Using I-DEAS –and– Creating Parts 2. Sketching and Constraining Recommended tutorials 1. Using Sketch Planes and Understanding Sketch Pads 2. Extruding..


　 Managing Parts in Model Files 2009-01-13 6 112.15 KB
Setting your defaults What: Before continuing, set the following default options for this tutorial. How: Options Preferences... Preferences form Modeler/Assembly... Modeler/Assembly Preferences form Drag for revolve creation (off) OK ..


　 Modeler Troubleshooting 2009-01-13 9 165.2 KB
Before you begin... Prerequisite tutorials: 1. Introducing the I-DEAS Interface –and– Quick Tips to Using I-DEAS 2. Creating Parts 3. Sketching and Constraining 4. Dimensioning 5. Building Sections 6. Using Sketch Planes and Understan..


　 Using History Access to Modify Features 2009-01-13 8 110.43 KB
Setup 1 of 2 Open the model file that you created from the previous tutorial, Modifying Features. File Open Open Model File form Model File name: modify OK Make sure you’re in the following application and task: Design, Manufacturing, ..


　 Modifying Features 2009-01-13 2 190.81 KB
Setup 2 of 6 Step 1. Create a part and give it a unique name. Pick the XY plane to sketch on. Step 2. Start in the lower left-hand corner to sketch this shape and dimension it as shown. Step 3. Using the Center Start End command, draw an a..