FEMFAT Tutorial Manual

http://www.cadfamily.com/downlist/s_461_1.html

FEMFAT 4.7 - BASIC User Manual 2009-02-13 4 4555.22 KB
The basic module: FEMFAT BASIC The procedure described here is recommended for operational strength analyses using FEMFAT BASIC. For damage or endurance strength limit analyses it is necessary to provide the program with the following inform..


　 FEMFAT Material Database 2009-02-13 6 400.08 KB
Table of Contents GENERAL-PURPOSE CONSTRUCTIONAL STEEL........................... 2 CASE HARDENING STEEL........................................................... 4 QUENCHED AND TEMPERED STEEL ............................................ 7 ..


　 Format STEYR DATABASE Format Description 2009-02-13 2 335 KB
Dataset Type: 221 Description: S/N CURVE DATA for MACHINE RIVITING Record 1: Format (A80) Field 1 - material description Record 2: Format (A80) Field 1 - additional description of specimen Record 3: Format (A80) Field 1 - additional desc..


　 FEMFAT 4.7 HEAT User Manual 2009-02-13 3 426.42 KB
1 Introduction Very often structural components are subjected not only to mechanical loads but also to large quasi-static changes of temperature. As it is known from engine components like cylinder heads or exhaust manifolds such thermal load..


　 FEMFAT 4.7 Introduction 2009-02-13 3 517.09 KB
1 Introduction FEMFAT is a program for strength and fatigue analyses of statically and dynamically loaded components on the basis of finite element analysis results. The analysis methods employed for the assessment of FEM results can be classi..


　 FEMFAT 4.7 MAX User manual 2009-02-13 2 3861.99 KB
All operations apply to the current group only, which must contain the nodes and elements of the regions of interest. It is therefore best to previously define the appropriate groups in the preprocessor application or in FEMFAT VISUALIZER. Th..


　 FEMFAT 4.7 - WELD Modelling Guideline 2009-02-13 4 824.6 KB
Modelling Guideline Weld Type: T-WELD 45° Seam Shape: one-sided Fillet-Seam inside (shell-solid-connection) 2D Modelling : Element type : THIN SHELL (linear or parabolic) 3D-elements (wedge or Hexa) RSSC (Rigid Shell Solid Connector -NAS..


　 FEMFAT 4.7 HEAT Sehitoglu User Manual 2009-02-13 2 371.74 KB
Creep damage is caused by mechanisms such as void growth and cracking along grain boundaries and is calculated as: ( ) ∫ ⎟⎠ ⎞ ⎜⎝ ⎛ + = Φ −Δ dt K Ae N m creep H RT H creep f α σ α σ 1..


　 FEMFAT 4.7 - SPOT User manual 2009-02-13 2 1367.22 KB
Their spot jointing significantly influences both the rigidity and the strength of thin sheet-metal car body components. The jointing technique used and the number and position of the spot joints have a high priority, both technically and eco..


　 FEMFAT 4.7 - STRAIN User Manual 2009-02-13 3 720.7 KB
TABLE OF CONTENTS 1 The FEMFAT STRAIN module ________________________ 2 2 FEMFAT analyses___________________________________ 2 3 The STRAIN CALC submodule _______________________ 3 3.1 Working with STRAIN CALC___________________________ 3 3..


　 FEMFAT VISUALIZER 3.0 User Manual 2009-02-13 2 3441.84 KB
Contents 1 FEMFAT VISUALIZER ______________________________ 4 1.1 Motivation for developing our own post-processor _________ 4 1.2 Functions ___________________________________________ 5 2 Results available for display_______________________..


　 FEMFAT 4.7 - WELD User Manual 2009-02-13 3 1866.8 KB
Introduction Due to the substantially lower loading capacity of welded components under dynamic loads, assessment of stresses in the weld area is of particular importance. Comprehensive standards and literature references offer a