Ensight -- Extract Separation and Attachment Lines

http://www.cadfamily.com/a/CAE_FEA_CFD/Ensight/Ensight----Extract-Separation-and-Attachment-Lines_6507.html

INTRODUCTION

Separation and attachment lines are created on any 2D surface and show interfaces where flow abruptly leaves

(separates) or returns (attaches) to the surface. For a more complete description refer to the User Manual section

below.

BASIC OPERATION

1. Select the 2D parent part.

2. Click the Separation/Attachment part

icon.

4. Define either Density and

Momentum or velocity, as

well as the Ratio of Specific

Heats.

The variables can be set by

either typing them into the

fields or be selecting them

from the list above and

clicking the Set button.

5. Click Okay to finish the

variable setup.

3. Bring up the dialog

defining the necessary

variables by clicking here.