The remote control connects directly to the PC through a standard RS–
232 port and can be used with COM1 – COM4. The com port settings
like baud rate, no. of bits and stop bit are set up by the program, making
it very easy to use. You only have to select the com port number to
which you have connected the remote control to make it work.
The Visual Basic program is provided on the same CD-ROM as PULSE
LabShop (version 4.0 or later) along with a test program that allows
you to test all functions of the control.
The remote control consists of 4 buttons, a 16 × 2 line LCD, and 3 LEDs
to indicate status or errors. A simple menu allows you to control all
important PULSE measurement functions – Autorange, Generator On/
off, Measurement Start, Proceed, Stop and Reset, Manual Triggers 1 to
3 and Save Measurement. The source code provided for the remote
control and its test program allows you to change these functions according to your own requirements and to test the changes made.
No comments:
Post a Comment