Charger in UG_NX Part A

 

figure1(final model)

Step1:Establish a new model,named charger.prt

Step2:Create extrude feature1 as shown in figure 2

figure 2

(1)Click ,design feature,extrude.(or click the button of ),Popping the dialog box of "extrude"

(2)Click ,click and choose XC-YC as plane,Click

(3)draw the figure 3 as follow.

figure 3 figure 4

(4)Click

(5)Change and input the value like the following figure 4

(6)Click

Step3:Create spilt body feature 1 as shown in figure 5

figure 5

(1)Click ,Popping the dialog box of "spilt body"

(2)Choose the whole body as target,and choose XC-YC as tool.

(3)Click

Step4:Create layer and move the body to the layer.

(1)Click ,Popping the dialog box of "move to layer"

(2)Choose the bottom body as object,click ,Popping the dialog box of "layer move"

(3)In the field of destination layer or category blank 2,click .

Step5: Layer setting.

Click and set the layer 2 to invisible.

Step6:Create extrude feature 2 as shown in figure 6

(1)Click ,design feature,extrude.(or click the button of ),Popping the dialog box of "extrude"

(2)Click ,click and choose ZC-YC as plane,Click

(3)draw the figure 7 as follow.

figure 7

(4)Click

(5)Change and input the value like the following figure 8

figure 6 figure 8

(6)Click

Step7:Create datum plane 1 as shown in figure 9

figure 9

(1)Click ,Popping the dialog box of "datum plane"

(2)In the field "type",choose "at distance" ,choose XC-YC as reference plane ,in the field of distance blank 8.7

(3)Click

Step8:Create extrude feature 3 as shown in figure 6

figure 6

(1)Click ,design feature,extrude.(or click the button of ),Popping the dialog box of "extrude"

(2)Click ,click and choose the datum plane 1 as plane,Click

(3)draw the figure 7 as follow.

figure 7 figure 8

(4)Click

(5)Change and input the value like the following figure 8,and click

(6)Click

Step9:Extract curve.

(1)Click ,click edge curves,Popping the dialog box of "single edge curve"

(2)Choose the curve showed in figure 9

(3)Click

figure 9

Step10:Create sketch feature 1

(1)Click ,sketch.(or click the button of ),Popping the dialog box of "sketch"

(2)(2)Choose the YC-ZC as sketch plane,Click

(3)draw the figure 10 as follow.

figure 10

(4)Click

Step11:Create project curve feature 1 as shown in figure 11

figure 11

(1)Click ,Popping the dialog box of "project curve"

(2)Choose the sketch feature 1 as curve to project choose the face in figure 12 as objects to project to.

figure 12 figure 13

(3)Change and input the value like the following figure 13

(4)Click

Step12:Create sketch feature 2 as shown in figure 14

figure 14

(1)Click ,sketch.(or click the button of ),Popping the dialog box of "sketch"

(2)Choose the YC-ZC as sketch plane,Click

(3)draw the figure 15 as follow.

figure 15

(4)Click

Step13:Create datum plane 2 as shown in figure 16

http://www.cadfamily.com/html/Article/Charger%20in%20UG_NX%20Part%20A_897_1.htm

http://www.cadfamily.com/html/Article/Charger%20in%20UG_NX%20Part%20A_897_2.htm

http://www.cadfamily.com/html/Article/Charger%20in%20UG_NX%20Part%20A_897_3.htm

http://www.cadfamily.com/html/Article/Charger%20in%20UG_NX%20Part%20A_897_4.htm

 

Charger in UG_NX Part B

http://www.cadfamily.com/HTML/Article/Charger%20in%20UG_NX%20Part%20B_898.htm