Initiative Shaft in UG_NX

 

figure1(final model)

Step1:Establish a new model,name initiative_shaft.prt

Step2:Create revolve feature 1 as shown in figure 2

figure 2

(1)Click ,design feature,revolve.(or click the button of ),Popping the dialog box of "revolve"

(2)Click ,click and choose ZC-YC as plane,Click

(3)draw the figure 3 as follow.

(4)Click

(5)Choose YC as revolve axis

(6)Click

figure 3

Step3: Create the edge blend feature 1

(1)Click ,Click detail feature→Click edge blend (or click the button of ),Popping the dialog box of "edge blend"

(2)Click ,choose the line as select edge (as showed in figure

4)and radius 1 blank 2.

figure 4

(3)Click

Step4:Create extrude feature 1 as shown in figure 5

figure 5

(1)Click ,design feature,extrude.(or click the button of ),Popping the dialog box of "extrude"

(2)Click ,clickand choose the datum plane 1 as plane,Click

(3)draw the figure 6 as follow

(4)Click

figure 6

(5)In the start distance input -50,and in the end distance input 50.

(6)Click

Step5:Trim the body showed in figure 7

figure 7

(1)Click ,trim,trim body,Popping the dialog box of "trim body"

(2)Choose the body showed in figure 8,choose the surface showed in figure 9 as tool,click .

figure 8

figure 9

(3)Click

Step6:Create mirror feature 1 as shown in figure 10

(1)Click ,associative copy,mirror feature.Popping the dialog box of "mirror feature"

(2)Choose XC-YC as mirror plane,and choose the feature showed in figure 11 as mirror feature

figure 10 figure 11

(3)Click

Step7:Create hole feature 1 as shown in figure 12

figure 12

(1)Click ,design feature,hole.Popping the dialog box of "hole"

(2)Clickand choose the circle point as origin.

(3)Click

Step8:Create datum plane 1 as shown in figure 13

figure 13

(1)Click ,Popping the dialog box of "datum plane"

(2)In the field "type",choose "at distance" , choose ZC-XC as reference plane,at the field of offset input 70

(3)Click

Step9:Create extrude feature 2 as shown in figure 14

(1)Click ,design feature,extrude.(or click the button of ),Popping the dialog box of "extrude"

(2)Click ,clickand choose the datum plane 1 as plane,Click

(3)draw the figure 15 as follow

figure 14 figure 15

(4)Click

(5)In the value start distance input 0,and in the value of end distance input 12,in the field of boolean choose unite.

(6)Click

Step10:Create datum plane 2 as shown in figure 16

(1)Click ,Popping the dialog box of "datum plane"

(2)In the field "type",choose "at distance" , choose the plane showed in figure 17 as reference plane,at the field of offset input 20

http://www.cadfamily.com/html/Article/Initiative%20Shaft%20in%20UG_NX_715_1.htm