UPPER_Housing in PROE

1.Launch PRO-E

2.Click icon, select part and input name “upper_housing”.

3.Clickicon, select the sketch plane FRONT then select OK to create a sketch as shown in Figure 1 ,then click the .

4.Select the sketch as shown in figure 1 then click icon and select extrude as solid then enter a depth of the extrude.the extrude1 as shown in Figure 2.

5.Click icon ,then select the protrusion icon under the sweep icon.select the sketch trajectory ,select the placement FRONT,select the OK and default ,then sketch the trajectory ,then click the process and the trajectory are shown in the Figure 3 and Figure 4.

6.Then sketch the section of the sweep,then click the ,the section as shown in Figure 5

http://www.cadfamily.com/html/Article/UPPER_Housing%20in%20PROE_513_1.htm

http://www.cadfamily.com/html/Article/UPPER_Housing%20in%20PROE_513_2.htm

http://www.cadfamily.com/html/Article/UPPER_Housing%20in%20PROE_513_3.htm