GearBox Body Modeling

http://www.cadfamily.com/HTML/Article/GearBox%20Body%20Modeling_540.htm

1.Launch PRO-E

2.Click icon, select part and input name

3.Clickicon, select the sketch plane FRONT then select OK to create a sketch as shown in Figure 0 and figure 0 ,then click the .

Figure 0

Figure 1

4.Select the sketch as shown in figure 1 then click icon and select extrude as solid then enter a depth of the extrude.the extrude1 as shown in Figure 2 and figure 3.

Figure 2

Figure 3

5.Click icon and then enter the angle then the round1 was accomplish,the process as shown in Figure 4.

Figure 4

6.Click icon and then enter the angle then the round2 was accomplish,the process as shown in Figure 5 and figure 6.

Figure 5

Figure 6

7.Clickicon, select the sketch plane FRONT this process as shown in figure 7 then select OK to create a sketch as shown in Figure 8 ,then click the .

http://www.cadfamily.com/html/Article/GearBox%20Body%20Modeling_540_1.htm

http://www.cadfamily.com/html/Article/GearBox%20Body%20Modeling_540_2.htm

http://www.cadfamily.com/html/Article/GearBox%20Body%20Modeling_540_3.htm

http://www.cadfamily.com/html/Article/GearBox%20Body%20Modeling_540_4.htm

http://www.cadfamily.com/html/Article/GearBox%20Body%20Modeling_540_5.htm