Head Cover
1. Launch UG.
2. Click 
icon, select Model and input name “Head Cover”.
3. Click 
icon and then click 
icon to input the origin as show in Figure 1, then click 
icon and then edit as shown in Figure 2, then click icon.
Figure 1 Figure 2
4. Click 
icon, then click 
icon, then click the yellow face as the planar placement face and select the red curve as the horizontal reference as shown in Figure 3, then edit as shown in Figure 4, then click icon
Figure 3
Figure 4
Then click 
icon, then the body as shown in Figure 5.
Figure 5
Then click 
icon, select the yellow edge as the target edge and select the red curve as the tool edge as shown in Figure 6, then edit as shown in Figure 7, and then click icon.
Figure 6
Figure 7 Figure 9
Then click icon, and select the yellow edge as the target edge and select the red curve as the tool edge as shown in Figure 8, then edit as shown in Figure 9, and then click icon.
Figure 8
Then click 
icon to shade with edges.
5. Click 
icon, then edit as shown in Figure 10 and select the red face as the planar placement face, then click 
icon.
Figure 10
Then click icon, then click icon, then select the yellow curve as shown in Figure 11 and then click the 
icon.
Figure 11
Then click icon, then select the yellow curve as shown in Figure 12 and then click the icon
http://www.cadfamily.com/html/Article/Design%20Head%20Cover%20with%20UG_NX_545_1.htm
http://www.cadfamily.com/html/Article/Design%20Head%20Cover%20with%20UG_NX_545_2.htm
http://www.cadfamily.com/html/Article/Design%20Head%20Cover%20with%20UG_NX_545_3.htm
No comments:
Post a Comment