Design Cellphone Panel with ProE Part-A

 

1.Launch PRO-E

2.Click icon, select part and input name “gear”.

3.Clickicon, select the sketch plane FRONT then select OK to create a sketch as shown in Figure 1 and figure 2 ,then click the

Figure 1

Figure 2

4.Select the sketch as shown in figure 2 then click icon and select extrude as solid then enter a depth of the extrude.the extrude1 as shown in Figure 3 and figure 4.

Figure 3

Figure 4

5.Clickicon, select the sketch plane surf F37 then select OK to create a sketch as shown in Figure 5 and figure 6 ,then click the

Figure 5

Figure 6

6.Select the sketch as shown in figure 6 then click icon and select extrude as solid then enter a depth of the extrude.the extrude1 as shown in Figure 7 and figure 8.

Figure 7

Figure 8

7.Click the icon to merge the quilt figure 4 and figure 8 ,this process as shown in figure 9 and figure 10 and figure 11

Figure 9

Figure 10

Figure 11

8.Click the icon ,then select the plane to create a new dtm .this process as shown in figure 12 and figure 13

Figure 12

Figure 13

9.Clickicon, select the sketch plane dtm1 this process as shown in figure 14 then select OK to create a sketch as shown in Figure 15 ,then click the .

http://www.cadfamily.com/html/Article/Design%20Cellphone%20Panel%20with%20ProE%20Part-A_561_1.htm

http://www.cadfamily.com/html/Article/Design%20Cellphone%20Panel%20with%20ProE%20Part-A_561_2.htm

http://www.cadfamily.com/html/Article/Design%20Cellphone%20Panel%20with%20ProE%20Part-A_561_3.htm