Lantek Expert Cut Cut module reference manual

http://www.cadfamily.com/a/CAM_CNC_DNC/LANTEK/Lantek-Expert-Cut-Cut-module-reference-manual_2793.html

Introduction
Name: Lantek Cut Iso... (Cutting machine)
To configure cutting machines, go to Work centers -> Action list -> Work center configuration ->
Machine option. You need to select Cutting machine in the table.
The parameters that can be configured are divided in different sections. In order to configure the
parameters of a particular section, double click on it or select the desired one and press the
button. Configure. These sections are:
1.1 General
This option enables configuration of the parameters in the General section of the machine:
Linear tolerance (e.g.0,01000 ) & Angular tolerance (e.g. 0,100 )
The system is going to make calculations with these values. The machine tolerance must be
configured in Postprocessor - General (See page 135).
Process the lead-in/lead-out, loops and micro-joints in the automatic nesting
If this parameter is activated, the space needed for leads, loops and micro-joints will be
considered in Automatic Nesting. The space left between parts could be enough but the system is
not going to guarantee the avoid of overlapping of parts with leads, loops or micro-joints unless
this option is enabled.